Surface Preparation
Initium
Initium paint is used to create a base coat of paint on walls and ceilings inside buildings.
Initium paint is used to create a base coat of paint on walls and ceilings inside buildings.
Initium primer paint is produced on the basis of an acrylic binder with the addition of high-quality fillers and chemicals. It evens out surface discolouration. It improves coverage, reduces wear and facilitates the application of finishing coats and decorative paints.
The paint can be coloured using pigments from the Fox Dekorator tube colouring system.
- Evens out surface discolouration
- Increases the adhesion of subsequent layers
- Snow white
Specifications
- Available packaging
- 1L
- Consumption
- approx. 9m² / l
Application technique
Step-by-step application
The paint is supplied ready to use. Before use, mix the paint thoroughly with a low-speed mixer, with a paint agitator, to homogenise the consistency.
The paint should be applied to the prepared and seasoned surface in a thin and uniform layer. Painting can be done with a roller, a brush or by spraying. Depending on the absorbency and texture of the surface, painting should be carried out once or twice. The second coat of paint should be applied after the first coat has dried completely.
Painting with the finishing coat can be started after about 2 hours, when the applied primer is sufficiently dry.
The complete system
Complementary products
Want this finish on your walls?
Send us a few details about your project and we will reply within 24 hours with a complete-system recommendation and the consumption estimate.
Request a quote