Surface Preparation
Bonding Primer
Bonding Primer is used for priming walls and ceilings indoors under plasters and structural paints.
Bonding Primer is used for priming walls and ceilings indoors under plasters and structural paints. Bonding Primer - ready to use, manufactured on the basis of polymer resins and quartz flour. It increases adhesion - it adheres strongly to the substrate and to the applied plaster. It contains aggregate – it creates a rough surface to facilitate the application of subsequent layers. It eases application and texturing.
- Contains aggregate
- Increases the adhesion of subsequent layers
- Reduces absorption
Specifications
- Available packaging
- 3kg, 1kg
- Consumption
- approx. 7m² / kg
Application technique
Step-by-step application
Surface preparation: The surface should be: stable, sufficiently load-bearing, seasoned to an air-dry state; clean, that is, free of dust and free of old paint layers and other coatings that may affect the adhesion of the paint, in particular dust, dirt, wax and grease; even, without cracks; repair defects before painting.
Primer preparation: The Bonding Primer is ready for application. It should be mixed well before use.
Priming: The Bonding Primer should be applied undiluted to the substrate, once with a brush, in the form of a thin and uniform layer.
Use of surfaces: Painting, wallpapering, tiling, etc. should be started after the primer has dried, after 4 - 6 hours.
The complete system
Complementary products
Want this finish on your walls?
Send us a few details about your project and we will reply within 24 hours with a complete-system recommendation and the consumption estimate.
Request a quote